ARTIDEE® | Fine Concrete — packs

ARTIDEE® Fine Concrete is a specially modified concrete mix that is made from high-quality phosphate cement combined with very finely sieved sea sand. It is excellent for casting finely structured, thin-walled concrete parts such as signs, brooches and pendant plates.

This ARTIDEE® Fine Concrete has a particularly high early and final strength. It can be used to cast pendants, bowls, models, reliefs, tiles, coasters etc. It is virtually free of pollutants and unlabelled products, nevertheless, protective gloves should be used during processing to avoid contact with the hands, which may become rough. Each pack contains processing instructions.

Mixing ratio for ARTIDEE® Fine Concrete is: 1 part water to 5 parts concrete. ARTIDEE® Fine Concrete can be coloured with coloured pigment powder, to do this, the mixing water is mixed with the pigment powder and the concrete is then mixed into it. If no release agent is used in the moulds, smooth outer surfaces without holes are produced. If the casting compound is poured into moulds that have been pre-treated with a release agent, small holes will appear, giving the typical concrete look.

The finished concrete parts can be directly glazed with transparent weather protection impregnation. The glaze dries matt, i.e. invisible, and protects the concrete surface from the effects of water and other substances, and also makes it weather-resistant. Alternatively, it is possible to prime it with casting compound stain and cover it with UV protective varnish or glossy cold glaze. This gloss-imparting technique is preferable for wall tiles.

Price per pack.